WATER SUPPLY FITTINGS

VAG RIKO Plunger Valve with handwheel.jp

VAG RIKO® Plunger Valveone-piece body, with handwheel

PN: 10/16/25/40 - DN: 150...2200

Productgroup: Control Valves

Medium: Water

Externally controlled control valve with annular flow cross-section for the continuous regulation of high pressure differences and flow rates. Long service life as the bearings do not come into contact with the medium. Wear-resistant, corrosion- and infiltration-proof guide rails due to hard-facing. This ensures low operating forces and prevents jamming of the piston. Suitable for use in water treatment, water distribution, in dams, power plants, industry and in pressure management.

VAG EKN.jpg

VAG EKN® H Butterfly Valve

epoxy

PN: 10/16/25 - DN: 150...1200

Productgroup: Butterfly Valves

Medium: Water

Energy-efficient, double-offset flanged butterfly valve (resilient-seated) suitable for the highest requirements, equipped with a patented hydro-dynamic disk, enlarged inner diameter and patented pressure compensation channels. Long service life, as the medium does not come into contact with the bearing, and due to the wear-resistant, corrosion- and infiltration-proof seat with weld overlay. Suitable for use in water distribution, water treatment, in pretreated waste water, dams, in power plants, industry and in pressure management.

Hawle PRO butterfly valve.JPG

Hawle PRO butterfly valve

The Hawle PRO butterfly valve is provided with a proportional action sealing system.

The sealing is accommodated in the body of the butterfly valve. The flanges can be quickly and easily changed from PN 10 to PN 16 or vice versa.

Apart from its real function as shut-off valve, the Hawle PRO butterfly valve can also be used as dismantling piece because of the integral loose flange system (no additional dismantling piece required).

Face-to-face dimension: standard series 14 acc. to DIN EN 558-1

Flange mating dimensions: acc. to EN 1092-2

Butterfly MIV.JPG

Centric Butterfly Valve series 13

APPLICATION: drinking water up to 65˚C (other on request)

DN 150 - 1200

PRESSURE: PN 10

VAG DURA Control Valve.jpg

VAG DURA Control Valvewith handwheel

PN: 10/16/25 - DN: 50...200

Productgroup: Control Valves

Medium: Water

Externally controlled control valve  for the regulation of the pressure and flow rate in service areas with external power supply. The control characteristic can be adapted to the operating conditions by means of a finely slotted cylinder serving as control insert. Suitable for use in water treatment, water distribution, in power plants, in industry and in pressure management.

F3 AS.jpg

FOX 3F-AS Anti Shock combination air valve

The CSA Mod. FOX 3F-AS, is a full bore high quality single chamber double function combination air valve with a built in anti-water hammer non slam surge prevention system. The air valve allows release of air pockets from pressurized pipelines, and admits large volume of air in the event of pipe draining/burst, to prevent vacuum and negative pressure conditions. The anti–shock mechanism, with adjustable nozzles, will control the air outflow rate thus avoiding fast approaches of water column with potential sudden closures of the mobile block and the risk of water hammer. Entirely made in ductile cast iron, with air release system and seat in stainless steel, FOX 3F-AS stands out for its long lasting performances and reliability.

XLC 400.jpg

XLC 400 series

Globe pattern control valve, PN 25 bar class, entirely made in ductile cast iron and stainless steel, the XLC 400 series is a full bore line available between DN 50 and 600 mm.

Characteristics
Material
VRCD.jpg

VRCD Direct acting pressure reducing-stabilizing

PN: 10/16/25 - DN: 50...200

Productgroup: Control Valves

Medium: Water

Externally controlled control valve  for the regulation of the pressure and flow rate in service areas with external power supply. The control characteristic can be adapted to the operating conditions by means of a finely slotted cylinder serving as control insert. Suitable for use in water treatment, water distribution, in power plants, in industry and in pressure management.

tel./fax

+389 2 2464 366